TWISTER PRO SERIES
NEW "2020" SERIES WITH A BEAUTIFUL ALL NEW DESIGN
BUILT-IN INDUSTRIAL WINDOWS 10 TOUCH PC
UNIQUE INDEPENDENT AXIS CONTROL FEATURE
MULTIPLE 3D OPTIONS: TURNTABLES, LATHE, SHAPEWIRE BAR
EUROPEAN QUALITY WITH CE CERTIFICATION
BACKED BY MEGAPLOT'S 25+ YEARS OF MANUFACTURING EXPERIENCE
OPEN FRAME HOT WIRE CUTTER
This video presents our latest and greatest open frame series of hot wire EPS and XPS cutters.
To learn more about the Open Frame series, please click here.
XTR PRO - CNC abrasive fast wire foam cutters
-
FULLY AUTOMATIC CONTOUR AND SHEET CUTTING MACHINES
-
IDEAL FOR:
-
POLYURETHANE FOAMS (PU or PUR)
-
POLYISOCYANURATE FOAMS (PIR, POLYISO, ISO)
-
POLYPROPYLENE & POLYETHYLENE FOAMS (PE, PP)
-
MINERAL WOOL, STONE WOOL, GLASS WOOL & ROCKWOOL
-
FOAMED GLASS, EPP, ETC.
-
-
CAN HANDLE FULL-SIZE BLOCKS
-
WORKING AREAS: 1200x2000, 2000x2000, 2500x2500 OR 3000x3000 MM
-
WIDE SELECTION OF CUTTING WIRES
-
INTUITIVE AND EASY-TO-LEARN FASTCUTTER APPLICATION
XTR MASTER THE PROUD WINNER OF
-
IDEAL FOR CUTTING FLAT ROOF PANELS OUT OF:
-
MINERAL WOOLS (STONE WOOL, GLASS WOOl, ROCKWOOL)
-
PIR & ISO FOAMS
-
POLYSTYRENE (EPS & XPS STYROFOAMS
-
-
FULLY AUTOMATIC CONTOUR CUTTING MACHINE ALSO IDEAL FOR PIPE INSULATIONS, CHIMNEY INSULATIONS AND MORE
-
TABLE SIZE: 1800X1800 MM
-
WORKING HEIGHT OF 300 MM
-
WIRE TILT UP TO 10%
-
EXCELLENT VALUE FOR MONEY, HIGH-END SPECS
SIMPLE 2D CUT
The movie on the right shows our smallest and least expensive P60S model cutting simple ABC lettering. This type of 2D cut is possible on all MegaPlot hot wire EPS cutters regardless of their series, size, type and configuration. It is used for cutting logos, lettering, architectural mouldings, packaging, etc.
For this type of cut, you need to prepare your drawing in graphics software (e.g. CorelDraw or AutoCad) and export to plt, dxf or EPS/AI.
3D CUT FROM 3D MODEL ON TURNTABLE
This video shows how easy it is to cut a complex 3D model on any MegaPlot hot wire machine equipped with a TurnTable.
You start with a 3D model prepared in one of the two supported formats (RAW from Rhino 3D or dxf 3D e.g. from AutoCad) and our software takes care of the rest.
This feature is extremely easy to use while providing you with full control over the final shape.
3D INDEPENDENT AXIS CUT
This is a 4-axis cut where both ends of the cutting wire move completely independent of each other. Thanks to our unique unlimited wire length change feature and the advanced electric wire tensioning (with a load cell and a motor-controlled spool of wire), there is no limit on the offset of the trolleys.
All you need is a simple two-color drawing (where each color represents one side of your shape) and our iXshaper software takes care of the rest.
The possibilities are endless.
COLUMN CUT ON HORIZONTAL LATHE
See how easy it is to produce an interesting column based on a simple 2D drawing consisting of your art line (column side) and a rotary axis.
This cutting mode is available on all MegaPlot hot wire machines equipped with the horizontal Lathe.
SHAPEWIRE CUT ON LATHE
See how replacing the standard straight resistant wire with a custom bent shape wire brings a whole new world of new possibilities.
Both ShapeWire and Lathe can be installed on all MegaPlot hot wire foam cutting machines.
MW MULTIWIRE CUT
A simple 2D cut done on an MW multi-wire MegaPlot hot wire cutter resulting in multiple identical shapes cut at the same time.
Standard MW models can use up to 10 wires at the same time.
Custom HD models with up to 20 wires are also available.
To ensure accurate cuts and great cutting quality, each wire on a multiwire machine comes with its own wire tensioner (pneumatic or spring-based, depending on machine width/model/configuration).
CC 70 ARCH & BASE CUTTER
This is the only MegaPlot hotwire machine not requiring a PC or any software yet it still provides fantastic possibilities.
It is used in two different ways:
- creating arches of any length or geometry,
- creating rotary shapes with pre-bent shape wire.
Both cutting modes are presented on the video on the right.